JDL Commercial Signs

SKU: JDLCMS Category: JDL Signs

From Price range: $ 48.00 through $ 150.00

A great extent using our eye-grabbing large JDL Commercial Signs. Usually placed on the street corners, our large Commercial Signs draw attention of dozens of drivers and passersby to your intended message every day. Made with Coroplast, Crezon Board or Alupanel, our sturdy Commercial Signs have plenty of curb appeal and are ideal for highlighting commercial properties.

3 People watching this product now!

Size

Orientation

Clear

Size (W x H)	{{nbd_fields['f1610752994508'].invalidOption}} is not available
Orientation	{{nbd_fields['f1655453036907'].invalidOption}} is not available
Material	{{nbd_fields['f1610751996594'].invalidOption}} is not available
Printed Sides	{{nbd_fields['f1610400399421'].invalidOption}} is not available
Lamination	{{nbd_fields['f1610400502710'].invalidOption}} is not available
Production Turnaround	{{nbd_fields['f1610408133202'].invalidOption}} is not available

Clear selection

Please check invalid fields and quantity input or choose a different combination!

Table pricing

From	Up to	Price / 1 item
{{pt.from}}	{{pt.up != '**' ? pt.up : 'or more'}}

Upload design

Custom design

Upload design

Artwork name :

Side 1

Select File Drag a file here Allow extensions: pdf,svg,jpg,ai

Complete

← Back to option

ARTWORK PREPARATION TIPS

Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
All type must be outlined (not embedded).
No linked images.
If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
The dieline shape must be a single path stroked.
Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
Black type should have the following values: C0, M0, Y0, K100.
The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.

( * file extension allowed: .pdf )

Description
Additional information

JDL Commercial Signs

File preparation matters more at commercial sign scale than anywhere else in print, because errors that are invisible on a proof become obvious at four by eight feet. Three things cause most reprints.

Low resolution logos are the first. A logo pulled from a website is typically 72 dots per inch and will pixelate badly when enlarged. Always supply vector artwork. The second is insufficient bleed, which leaves a white sliver along an edge after trimming. The third is placing critical text too close to the edge, where it can be lost under a frame or a fixing washer.

Send us vector files with a minimum quarter inch bleed and keep type well inside the trim, and we will proof the panel at size before printing. Available in 4mm and 10mm Coroplast, 3mm Alupanel and Crezon board, printed full colour in JDL brand colours with optional dry erase film lamination.

For other formats see JDL Signs (part of our wider JDL selection), or compare this directly with JDL Directional Signs. See also our quote request form. JDL Custom Riders is another option in the same range.

Material Type	4mm Coroplast, 10mm Coroplast, 3mm Alupanel
Coating	Dry Erase Film Lamination (Re-writable)
Color	Full color CMYK: 1 sided (4/0)
Sizes	48″x48″ \| 48″x72″ \| 48″x96″ \| 60″x120
File Type	Print Ready PDF file
Finishing	Cut to size.
Design Options	Use our free online design tool (begin by choosing one of our design templates) Upload your own print-ready design files (please see our artwork guidelines) Let us design for you (hire a graphic design expert to work for you at an affordable price)