20mil Magnets

From $ 6.40

SKU: N/A

Print Sides

Clear

Size (W x H)	Width - + Height - + in Width: min 8 - max 24 Height: min 8 - max 360 Invalid value
Orientation	{{nbd_fields['f1638237881451'].invalidOption}} is not available
Material	{{nbd_fields['f1611459268392'].invalidOption}} is not available
Printed Sides	{{nbd_fields['f1638237977299'].invalidOption}} is not available
Production Turnaround	{{nbd_fields['f1614028833795'].invalidOption}} is not available
Google price	{{nbd_fields['f1640051856286'].invalidOption}} is not available
100	{{nbd_fields['f1654208261593'].invalidOption}} is not available

Clear selection

Please check invalid fields and quantity input or choose a different combination!

Table pricing

From	Up to	Price / 1 item
{{pt.from}}	{{pt.up != '**' ? pt.up : 'or more'}}

Upload design

Custom design

Upload design

Artwork name :

Side 1

Select File Drag a file here Allow extensions: pdf

Complete

← Back to option

ARTWORK PREPARATION TIPS

Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
All type must be outlined (not embedded).
No linked images.
If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
The dieline shape must be a single path stroked.
Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
Black type should have the following values: C0, M0, Y0, K100.
The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.

( * file extension allowed: .pdf )

20mil Magnets

At 20mil, this is our lighter weight magnet, suited to flat indoor metal surfaces such as filing cabinets, fridges, service counters, lockers and tool chests. It is the right choice for calendars, emergency contact cards, schedules and giveaway branding where the magnet stays in one place.

Printed full colour on one side with no coating and cut to size, in quantities from 1 to 10 so you can order a single piece to test a design before committing. For vehicle door branding we would steer you to the 30mil version instead, since thinner material is more prone to lifting at highway speed.

Whichever thickness you choose, clean and dry the surface before applying, pick rounded corners for a stronger grip, remove the magnet before running a vehicle through a car wash, and take it off periodically to clean underneath so grit does not scratch the surface below.

Browse the full Magnetic Materials range (part of our wider roll and sheet materials selection) to compare stocks side by side, or take a look at 30mil Car Magnets for a different finish. You may also want to see current turnaround times.

Paper Type	20mil Magnet
Coating	No Coating
Color	Full color CMYK: 1 sided (4/0)
Quantities	Ranges from 1 to 10

Finishing	Cut to size
File Type	Print Ready PDF file
Special Instructions	– Clean and dry metal surface before applying magnet – Choose rounded corners for stronger magnetic grip – Remove magnet before a car wash – Remove and clean magnet regularly

Weight	25 lbs
Dimensions	10 × 1 × 10 in

Select a template from the configurations below. Click on an image to see the preview. Click Customize below your selection to be taken to the Design Studio where you can easily add desired text and images. In the design studio, you also have access to our image library, as card card-body as ability to create your own library.

We suggest you to log-in before designing to ensure designs are saved.