30mil Magnet A thick magnet that can be placed on vehicle doors to add corporate branding.

3 People watching this product now!

30mil Magnets

From $ 6.40

SKU: N/A

Print Sides

Clear

Size (W x H)	Width - + Height - + in Width: min 8 - max 24 Height: min 8 - max 360 Invalid value
Orientation	{{nbd_fields['f1638237881451'].invalidOption}} is not available
Material	{{nbd_fields['f1611459268392'].invalidOption}} is not available
Printed Sides	{{nbd_fields['f1638237977299'].invalidOption}} is not available
Production Turnaround	{{nbd_fields['f1614028833795'].invalidOption}} is not available
Google price	{{nbd_fields['f1640053028750'].invalidOption}} is not available
100	{{nbd_fields['f1654208393469'].invalidOption}} is not available

Clear selection

Please check invalid fields and quantity input or choose a different combination!

Table pricing

From	Up to	Price / 1 item
{{pt.from}}	{{pt.up != '**' ? pt.up : 'or more'}}

Upload design

Custom design

Upload design

Artwork name :

Side 1

Select File Drag a file here Allow extensions: pdf

Complete

← Back to option

ARTWORK PREPARATION TIPS

Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
All type must be outlined (not embedded).
No linked images.
If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
The dieline shape must be a single path stroked.
Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
Black type should have the following values: C0, M0, Y0, K100.
The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.

( * file extension allowed: .pdf )

30mil Magnets

The heavier 30mil gauge is the standard for vehicle door branding because the added thickness gives it the grip and rigidity to stay put at speed. It also lies flatter on slightly curved panels than thinner material, which reduces the edge lifting that causes magnets to peel away on the highway.

Printed full colour on one side, no coating, cut to size, available from 1 to 10 pieces. Beyond vehicles it is used for equipment identification, site signage on metal hoardings, warehouse labelling and any application where the magnet is repeatedly removed and replaced.

Care is straightforward. Apply only to clean, dry, painted metal. Choose rounded corners to reduce lifting at the edges. Remove the magnet before a car wash. Lift and clean both surfaces regularly so trapped dirt does not scratch the paint underneath.

Still deciding? The Magnetic Materials category (part of our wider roll and sheet materials selection) lists every option we carry, and 20mil Magnets is the closest alternative to this one. Take a look at our shipping guide too.

Paper Type	30mil Magnet
Coating	No Coating
Color	Full color CMYK: 1 sided (4/0)
Quantities	Ranges from 1 to 10

Finishing	Cut to size
File Type	Print Ready PDF file
Special Instructions	– Clean and dry metal surface before applying magnet – Choose rounded corners for stronger magnetic grip – Remove magnet before a car wash – Remove and clean magnet regularly

Weight	10 lbs
Dimensions	36 × 6 × 6 in

Select a template from the configurations below. Click on an image to see the preview. Click Customize below your selection to be taken to the Design Studio where you can easily add desired text and images. In the design studio, you also have access to our image library, as card card-body as ability to create your own library.

We suggest you to log-in before designing to ensure designs are saved.