Printomatic

Due to uncertainties in the industry supply chain, there is a possibility that orders may experience delays.

Double Sided Labels

Home / Shop by Products / Labels & Stickers / Double Sided Labels
Double Sided Labels

Double Sided Labels

SKU: DSCL Category:

From $ 11.98

Double-sided labels have graphics on both sides of the label. When used as the back label on a glass bottle containing clear or light-colored liquid, the inward-facing images serve as a backdrop for the front label. Double-sided printing allows for complete graphics on both the front and rear of a label, allowing them to be seen through the backside of the bottle. This strategy elevates your brand by providing beautiful visual intrigue and a distinct retail appeal.

  Clear selection
{{nbd_fields['f1631809290792'].invalidOption}} is not available
- +
- + in
Width: min 1 - max 12
Height: min 1 - max 12
Invalid value
{{nbd_fields['f1631836115878'].invalidOption}} is not available
Min size: 0 MB Max size: 64 MB Invalid value, min: 1 Invalid value, max: 100
{{nbd_fields['f1631809618667'].invalidOption}} is not available
{{nbd_fields['f1631989394032'].invalidOption}} is not available
{{nbd_fields['f1631809691581'].invalidOption}} is not available
{{nbd_fields['f1631987173968'].invalidOption}} is not available
{{nbd_fields['f1639943177127'].invalidOption}} is not available
{{nbd_fields['f1659369105641'].invalidOption}} is not available
{{nbd_fields['f1659369108869'].invalidOption}} is not available

Please check invalid fields and quantity input or choose a different combination!

Table pricing

FromUp toPrice / 1 item
{{pt.from}}{{pt.up != '**' ? pt.up : 'or more'}}

Upload design

Artwork name :
Front Side
Back Side
Complete

← Back to option

ARTWORK PREPARATION TIPS

  1. Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
  2. Files must be submitted with proper orientation to ensure proper back up.
  3. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
  4. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  5. All type must be outlined (not embedded).
  6. No linked images.
  7. If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
  8. The dieline shape must be a single path stroked.
  9. Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
  10. Black type should have the following values: C0, M0, Y0, K100.
  11. The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
  12. If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
  13. File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
  14. If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.
* file extension allowed: .pdf )
How would you like to design your Double Sided Labels

Upload a full design

  • - Have a complete design
  • - Have your own designer

Design here online

  • - Already have your concept
  • - Customise every detail
×
Estimated Shipping Cost

Description

Material Type

3.8 mil Removable Adhesive Matte Clear Vinyl

 3.8 mil Removable Adhesive Gloss Clear Vinyl

Color

Full color CMYK:  2 sided (4/4)

size 

Different sizes are available for Block Out Adhesive Vinyls

Additional information

Weight0.005 kg
Dimensions0.5 × 0.5 × 0.001 in

label terminology

 Important  details for  label terminology for  make ordering easier.
Adhesively
  • Permanent labels permanently stick to the surface. Removing them may cause damage to labels or application surface.
  • Removable labels can be repositioned and removed without damaging the label or the application surface.
Custom Shape Labels
  • Any shape that is not a circle, oval, rectangle or square.
Diameter
  • For circle shaped labels, dimensions are measured by diameter in inches.
FinishingLamination is a clear, plastic film applied to labels for added durability.

  • Matte lamination offers a smooth and non-gloss finish.
  • Gloss lamination offers a glossy finish.
WindRefers to the direction that the label feeds off the roll.
Ink Color
  • White + CMYK: Choose this option for artwork where your artwork is CMYK but you also need to have a white color on a material that is itself not white (i.e. Silver and Clear Vinyl). The white ink can also be used as a special effect on your labels.
  • White Only: Only available with colored and Clear labels.

DESIGN GUIDELINES

file prep icon 1file prep icon 2file prep icon 3

Step 1

Ensure the file matches the product’s required dimensions. Ensure that the artwork is created in CMYK 300 dpi with 1/16 inch bleeds on all sides.

Step 2

Make sure that all images are embedded, and that all the text is outlined.

Step 3

Export all files into PDF format with bleeds.

label File Preparation

How To Set Up Your Files

  • Custom Shapes

When submitting your artwork for custom shaped labels, prepare colour and design as you would any label file. Moreover, please include the shape dieline as a spot colour called ‘Dieline’. While preparing your dieline, keep note of the following:

  1.          Dieline must be its own layer with no other artwork in that layer
  2.          Dieline must be a single stroked (not filled) path; not a dashed line or series of lines making an overall shape

  • White Ink

If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink

                   Do not supply separate files for CMYK and White Ink

If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this.

You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.

  • SPOT UV 

                      If you select a Spot UV option with your order, please supply a single file that includes CMYK and a spot colour called exactly Spot-UV

Do not supply separate files for CMYK and Spot-UV

  • Black Ink Only

 If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline.

 

General File Preparation Guidelines

  1. Download our guides to ensure a more optimal print result.
  2. Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
  3. Each job (including multiple paged projects) must be submitted as a single PDF file. Ensure that all pages are the same size.
  4. Files must be submitted with proper orientation to ensure proper back up.
  5. It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-centre.
  6. File must consist of 1/8″ bleed and all important art and text must be within the safety margin.
  7. Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
  8. Black type should have the following values: C0, M0, Y0, K100.
  9. Embed or outline all fonts.

For best colour results, supply a CMYK only files.

Labels Guide Files

Square  Labels

 

Circle  Labels

Oval  Labels