30mil Magnet A thick magnet that can be placed on vehicle doors to add corporate branding.

3 People watching this product now!

30mil Car Magnets

From $ 8.40

SKU: N/A

Print Sides

Clear

Size (W x H)	{{nbd_fields['f1611463636919'].invalidOption}} is not available
Orientation	{{nbd_fields['f1638237881451'].invalidOption}} is not available
Material	{{nbd_fields['f1611459268392'].invalidOption}} is not available
Printed Sides	{{nbd_fields['f1638237977299'].invalidOption}} is not available
Production Turnaround	{{nbd_fields['f1614028833795'].invalidOption}} is not available
Google price	{{nbd_fields['f1640053239180'].invalidOption}} is not available
100	{{nbd_fields['f1654208461538'].invalidOption}} is not available

Clear selection

Please check invalid fields and quantity input or choose a different combination!

Table pricing

From	Up to	Price / 1 item
{{pt.from}}	{{pt.up != '**' ? pt.up : 'or more'}}

Upload design

Custom design

Upload design

Artwork name :

Front

Select File Drag a file here Allow extensions: pdf

Complete

← Back to option

ARTWORK PREPARATION TIPS

Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
Files must be submitted with proper orientation to ensure proper back up.
It is best to try to avoid using borders in your design. If a border is too close to the trim, the trim may be slightly off-center.
Ensure that your PDF is high res and that all images are CMYK at 300 DPI.
All type must be outlined (not embedded).
No linked images.
If file contains a dieline, it must be a separate spot colour called Dieline and be on its own layer.
The dieline shape must be a single path stroked.
Please provide vector only artwork for type, logos, shapes and all other artwork. Only provide embedded raster artwork for actual 4/C images.
Black type should have the following values: C0, M0, Y0, K100.
The trim size of the Illustrator file must match the final trim size of the label. Use bleed settings in Illustrator of 0.0625 inches minimum each way.
If you select a White Ink option with your order, please supply a single file that includes CMYK (if necessary) and a spot colour called exactly White_Ink. Do not supply separate files for CMYK and White Ink. If you want white ink to print under a blue colour, you need to set either the blue shape or the White_Ink shape to overprint to achieve this. You may also want to set a White_Ink shape to knockout so nothing prints on top of it. Remember to set overprints on any Dieline.
File should be CMYK only (no RGB) with a Dieline and/or White_Ink spot colour depending on your order specifications.
If you select Black Only option on your order, the file you supply should be K only (not CMYK or RGB) with a Dieline and/or White_Ink spot colours depending on your order specifications.

( * file extension allowed: .pdf )

30mil Car Magnets: Choosing the Right Gauge

Magnet thickness is the single decision that determines whether vehicle signage stays on the door or ends up on the highway. This page covers the 30mil gauge specifically, which is the thickness we recommend for any magnet that travels at road speed.

Thinner 20mil material is fine on a filing cabinet or a fridge, but on a moving vehicle the airflow gets under the leading edge and lifts it. At 30mil the sheet is rigid enough to resist that lift and heavy enough to hold firmly against the slight curve of a door panel. It also survives repeated removal and reapplication far better, which matters if the magnet comes off every evening.

Printed full colour on one side, cut to size, in quantities from 1 to 10. Clean and dry the door before applying, choose rounded corners, remove before a car wash, and lift the magnet weekly to clean both surfaces.

This sits alongside the rest of our Magnetic Materials products (part of our wider roll and sheet materials selection); 30mil Magnets is worth a look if you need a different spec. See also our quote request form.

Paper Type

30mil Magnet

Coating

No Coating

Color

Full color CMYK: 1 sided (4/0)

Quantities

Ranges from 1 to 10

Sizes

9″x9″	9″x12″	9″x18″	9″x24″	12″x12″
12″x18″	12″x24″	18″x18″	18″x24″	24″x24″

Finishing

Cut to size

File Type

Print Ready PDF file

Special Instructions

– Clean and dry metal surface before applying magnet
– Choose rounded corners for stronger magnetic grip
– Remove magnet before a car wash
– Remove and clean magnet regularly

Weight	5 lbs
Dimensions	48 × 6 × 6 in

Select a template from the configurations below. Click on an image to see the preview. Click Customize below your selection to be taken to the Design Studio where you can easily add desired text and images. In the design studio, you also have access to our image library, as card card-body as ability to create your own library.

We suggest you to log-in before designing to ensure designs are saved.